Metal drum shells

Seamless metal drum shells by Oriollo
  • Metz

    Oriollo Metz™ drum shell is made out of single sheet of aluminum drawn and spun in a seamless construction. The process is shown in this video. The bearing edges and snare beds are made using presses and molds/dies so each and every shell is 100% perfect (and same).

    Material: Aluminum
    Thickness: 1.5mm
    Shell type: Seamless / Spun / Drawn
    Diameter: 14"
    Depths: 4.5", 5.5" and 6.5"
    Bearing edges: 45 degrees
    Snare bed: wide and shallow
    Finish: Brushed
    Bead: Yes, on 5.5" and 6.5" versions

    Select your Metz shell
  • Schafberg

    Oriollo Schafberg™ drum shell is made out of single sheet of manganese steel, drawn and spun in a seamless construction. The process is shown in this video. The bearing edges and snare beds are made using presses and molds/dies so each and every shell is 100% perfect (and same).

    Material: Manganese steel
    Thickness: 1mm
    Shell type: Seamless / Spun / Drawn
    Diameter: 14"
    Depths: 4.5", 5.5" and 6.5"
    Bearing edges: 45 degrees
    Snare bed: wide and shallow
    Finish: Galvanized
    Bead: Yes, on 5.5" and 6.5" versions

    Select your Schafberg shell
  • Lefkada

    Oriollo Lefkada™ drum shell is made out of single sheet of copper, spun and drawn in a seamless construction. The process is shown in this video. The bearing edges and snare beds are made using presses and molds/dies so each and every shell is 100% perfect (and same).

    Material: Copper
    Thickness: 1mm
    Shell type: Seamless / Spun / Drawn
    Diameter: 14"
    Depths: 4.5", 5.5" and 6.5"
    Bearing edges: 45 degrees
    Snare bed: wide and shallow
    Finish: Raw or Brushed
    Bead: Yes, on 5.5" and 6.5" versions

    Select your Lefkada shell
  • Firenza

    Oriollo Firenza™ drum shell is made out of single sheet of high-quality brass, drawn and spun in a seamless construction. The process is shown in this video. The bearing edges and snare beds are made using presses and molds/dies so each and every shell is 100% perfect (and same).

    Material: Brass
    Thickness: 1mm
    Shell type: Seamless / Spun / Drawn
    Diameter: 14"
    Depths: 5.5", 6.5" and 8"
    Bearing edges: 45 degrees
    Snare bed: wide and shallow
    Finish: Raw or Brushed
    Bead: Yes, double bead on the 8" version

    Select your Firenza shell
  • Casablanca

    Oriollo Casablanca™ drum shell is made out of special steel alloy we came out with. We called it Oristeel. It's machined to 3mm thick walls and 5mm reinforcement rings, on the top and bottom. The machining process is shown in this video.

    Material: Steel (Oristeel alloy)
    Thickness: 3mm (5mm on edges)
    Shell type: Seamless / Cast / Machined
    Diameter: 14"
    Depths: 6.5", 7" and 8"
    Top bearing edge: double 45 degrees
    Bottom bearing edge: double 45 degrees
    Snare bed: medium wide and shallow
    Finish: Galvanized

    Note: Lead time for this shell is up to 10 days. You can order shells out of this alloy with different specs (wall thickness, diameter, edges, ...)

    Select your Casablanca shell
  • Belgrade

    Oriollo Belgrade™ drum shell is made out of top quality bell bronze. It's first centrifugally cast with 10mm thick wall, then machined to 3.4mm wall. The machining process is shown in this video.

    Material: Bell Bronze
    Thickness: 3.4mm
    Shell type: Seamless / Cast / Machined
    Diameter: 14"
    Depths: 5.5", 6.5" and 7"
    Top bearing edge: rounded outside, 45 degrees inside
    Bottom bearing edge: rounded outside, 45 degrees inside
    Snare bed: medium wide and shallow
    Finish: Brushed

    Note: Lead time for this shell is up to 30 days. You can order shells out of this alloy with different specs (wall thickness, diameter, edges, ...)

    Select your Belgrade shell

FREE Worldwide shipping!

 

Wholesale discounts available.
Drilling services: $50 per spun shell, $80 per cast shell.